|
Title: Where does this thinny go??? Post by: Peter r on February 13, 2011, 05,16:33 PM I was putting the new Rear Subframe Tank on, and i found this springy thingo just lying on the floor.
"Where does it go" I think it might be from around the Speedo area!!!! Suggestions on where to put it, would be helpful. (http://i882.photobucket.com/albums/ac22/Berg2/Picture47.jpg) Title: Re: Where does this thinny go??? Post by: Willbar on February 13, 2011, 05,22:11 PM I was putting the new Rear Subframe Tank on, and i found this springy thingo just lying on the floor. Back from where it came from is always good :D ;D"Where does it go" I think it might be from around the Speedo area!!!! Suggestions on where to put it, would be helpful. (http://i882.photobucket.com/albums/ac22/Berg2/Picture47.jpg) Title: Re: Where does this thinny go??? Post by: Serge C on February 13, 2011, 05,34:30 PM Back from where it came from is always good :D ;D Let's be a bit more inventive, Will! It's an ugly spring, so it should go somewhere it can't be seen. It's cylindrical in shape, so it needs to go into a cylindrical vessel and it goes up and down, so I'm thinking Pete could put it in his clack!! ;D Title: Re: Where does this thinny go??? Post by: Frankie-boy on February 13, 2011, 06,10:33 PM Most times when I pull things apart I always have things over, so I wouldn't worry to much, maybe the next time you go riding you might remember where it goes ;D
Title: Re: Where does this thinny go??? Post by: seano on February 13, 2011, 06,51:58 PM I was putting the new Rear Subframe Tank on, and i found this springy thingo just lying on the floor. Back from where it came from is always good :D ;D"Where does it go" I think it might be from around the Speedo area!!!! Suggestions on where to put it, would be helpful. (http://i882.photobucket.com/albums/ac22/Berg2/Picture47.jpg) Title: Re: Where does this thinny go??? Post by: Mat R on February 13, 2011, 08,04:11 PM Under the bed, at the end. Help soften the ride.
Title: Re: Where does this thinny go??? Post by: OZinUS on February 15, 2011, 03,26:46 PM Goes in the muffler, it dampens the exhaust pulsations and helps with back pressure.
Havent you got that tank on and going yet? Title: Re: Where does this thinny go??? Post by: Peter r on February 15, 2011, 03,46:33 PM Goes in the muffler, it dampens the exhaust pulsations and helps with back pressure. Sorry Stewart, but it's Aircond season at the moment so NO i haven't done it yet. " But i'm working on it"Haven't you got that tank on and going yet? Title: Re: Where does this thinny go??? Post by: Peter r on February 15, 2011, 03,49:31 PM How goods This
I took out the Swingarm bolt last night, and pushed it out with one finger, just goes to show how good those Berg are, bearings are still 100% perfect. Title: Re: Where does this thinny go??? Post by: MarcL on February 17, 2011, 09,03:10 AM As a Honda rider, I would keep in my back pack as a spare !!!
|